Replace 2 Handle Faucet With 1 Handle. Place the handle over the assembly and secure with the original set screw. Unscrew the set screw to remove the handle.
(the allen screw clamps onto the stem.) try grabbing it with the pliers and twisting. There should be a very small hole with an allen key screw in the back. Shower faucet handles costs between $20 and $100.
Note The Brass Screw At The Top Of The Cartridge, If There Is One.
Take out the cartridge, and unscrew and remove the trim surrounding the faucet. Use an allen key to loosen and remove this screw. Slide in the new handle, put the screw back and turn the water back on.
Position The Faucet Onto The Sink, Inserting The Tailpieces Through The Holes In The Sink.
If your faucet has a lock ring or lock nut, you will need place it over the stem and tighten with a screwdriver or pliers. Its purpose is to reinforce the cartridge shaft when the faucet body's setscrew is tightened against it. Single hole mount, and centerset style.
Look For A Screw Under The Handle Or At The Front Concealed By An Index Cap.
Carbide jigsaw blades will cut it nicely. Unscrew the set screw to remove the handle. Punch a hole into the wall behind the faucet to mark the location of the access panel.
Prepare The Sink Deck As Directed By The Faucet Instructions.
Use plumbers putty to seal. You are now ready to put the cap back on each of your handles. With the handle removed, the top of the valve will be visible (fig.
Disconnect The Supply Lines With An Adjustable Wrench And Place A Bucket Under The Sink To Catch Any Excess Water.
Remove the screw and pull out the handle. If your current 2 handle faucet has valves located 4 apart, you may be able to replace it with a single control faucet. Very easy to drill using a carbide or diamond hole saw.it's only a little harder than plaster.
Tidak ada komentar:
Posting Komentar